On the top of the camera, slide the switch from off to on.
To change photo settings, twist the settings on the top. The green A in a square is the automatic setting. It is recommended to start with the automatic setting before trying other settings.
To take a picture, press the large black circle button on the top of the camera towards the front of the camera on the right side.
Press slightly to auto focus, then fully press to take the photo.
To view the photos, press the blue square with the triangle button to the right of the display screen, to scroll through photos.
To charge the camera, turn the camera over. On the bottom there is a flap labeled, Card/Batt. Open, slide the notch down to open.
Once open, there is a light gray notch on top of the battery. Slide off the notch and the battery will pop up and will be able to remove.
After removing the battery, place it inside the provided wall charger and plug into outlet.
Transferring Photos
Make sure the power is turned off on the camera. Take the provided USB cable and plug it into the side of the camera.
Connect the larger USB side into a computer, and now power on the camera.
Select the file explorer, and to the left side the Canon EOS Rebel T7 should now be listed.
Select Canon EOS Rebel T7> SD > DCIM Folder and the image files will be displayed.
Formatting SD Memory Card
Power on the camera. Select the Menu button to the right of the display screen.
Under the yellow wrench tab on the screen, select Format card by pressing the Set button.
Select OK and the card will show load bar and have deleted all files.
